Vape Tanks Explained

Quick answer: A vape tank holds your e-liquid and the coil that vaporizes it. The main types are clearomizers (simple pen-style tanks), mouth-to-lung (MTL) tanks, sub-ohm tanks for bigger vapor, and rebuildables (RTAs, RDAs and RDTAs) where you build your own coils. Most beginners start with a pre-built coil tank; rebuildables suit experienced vapers.
Vape tanks can seem like a lot to learn if you're just getting started. This guide covers the main types of tanks, how they differ, and how to pick one for your setup.
What Is a Vape Tank?
A vape tank is the part of your setup that holds e-liquid and houses the coil. Most tanks screw onto a mod or battery with a 510 thread connection. Inside, e-liquid soaks into a wick that touches the coil. When you fire the device, the coil heats up and vaporizes the e-liquid in the wick, and the tank keeps the wick topped up as you vape.
Want to know what each part does, from the drip tip to the 510 pin? See our vape tank anatomy guide.
Different Types of Vape Tanks
Clearomizers
Clearomizers are small, usually pen-style tanks with a clear section so you can see how much e-liquid is left. They're refillable, use replaceable coils, and are simple to use, which made them common on early vape pens.
Mouth-to-lung (MTL) tanks
MTL tanks have tighter airflow for a draw similar to drawing into your mouth first, then inhaling. They typically use higher-resistance coils at lower wattage and pair well with higher-strength freebase or nic salt e-liquid.
Sub-ohm tanks
Sub-ohm tanks use coils below 1 ohm and run at higher wattage on a box mod. They have wider airflow for direct-to-lung vaping and bigger vapor, and they're made for lower-strength freebase e-liquid. Most connect with a standard 510 thread, so they fit a wide range of mods. The Geekvape Z FLI 2 Tank, for example, holds 5.5mL, measures 29mm across and uses Geekvape Z XM coils, according to Geekvape.
Rebuildable atomizers (RBAs)
Rebuildables let you build and wick your own coils instead of buying pre-made coil heads. They take more skill and setup, but give you more control over how the device vapes. There are three main kinds:
- RTA (rebuildable tank atomizer): a tank with a reservoir, like a sub-ohm tank, but with a deck where you install your own coils.
- RDA (rebuildable dripping atomizer): no reservoir. You drip e-liquid directly onto the coils and wick, so you refill often.
- RDTA (rebuildable dripping tank atomizer): a hybrid with the build deck sitting above a small reservoir.
Shop RTAs, RDAs and all rebuildables.
Vape Tank Types at a Glance
| Type | Coils | Draw | Best for |
|---|---|---|---|
| Clearomizer | Pre-made | Usually MTL | Simple pen setups |
| MTL tank | Pre-made | Tight | Lower-power vaping |
| Sub-ohm tank | Pre-made, below 1Ω | Open (direct-to-lung) | Bigger vapor on a box mod |
| RTA | Self-built | MTL or open | Experienced users who want a reservoir |
| RDA | Self-built | Usually open | Experienced users who don't mind dripping |
| RDTA | Self-built | Usually open | A mix of RDA and RTA |
How to Choose a Vape Tank
- Match the draw you like. Tighter MTL draw or open direct-to-lung draw.
- Check your mod. Make sure it can run the coil's wattage range and that the tank isn't wider than the mod's top.
- Match your e-liquid. Sub-ohm tanks are made for lower-strength freebase e-liquid; MTL setups suit higher strengths.
- Think about upkeep. Pre-made coils are easy to swap; rebuildables take more time and skill.
Keeping your tank in good shape helps it last: see how to clean and maintain your vape tank and how to prevent and fix vape tank leaks.
Vape Tank FAQ
What is the difference between a sub-ohm tank and an RTA?
A sub-ohm tank uses pre-made coil heads you swap out. An RTA has a build deck where you install and wick your own coils.
Do all tanks fit all mods?
Most tanks use a standard 510 thread, so they'll screw onto most mods. Still check the tank's width and the coil's wattage range against your mod.
Which tank is best for beginners?
A tank with pre-made coils, such as an MTL or sub-ohm tank, is easier to start with than a rebuildable.
Conclusion
Every vape tank holds e-liquid and a coil, but they differ in coil type, airflow, capacity and how much setup they take. Whether you want a basic tank or an advanced RTA, Vape.com has a wide range to choose from.
Content Sources
Manufacturer
